Coaxial 3D-FB Cable, 1 m
A coaxial 3D-FB cable is mainly used for radio frequency signal transmission. The length is 1 m, the working frequency range is 0-6 GHz. This cable will perfectly suit all HiBoost mobile booster models.
- 1m/3ft length
- Low loss
- Light, flexible and weatherproof
- Low transmission delay
- Minimum attenuation
Description
A coaxial 3D-FB cable is mainly used for radio frequency signal transmission. The length is 1 m. The working frequency range is 0-6 GHz. This cable will perfectly suit all Huaptec mobile booster models.NOTE: Mind, that too long cable for the booster kit will decrease the signal enhancement power of the system.
| Inner Conductor Material | Solid Copper or Copper Clad Steel (1.02 mm) |
|---|---|
| Dielectric Material | Physical Foam Polyethylene (3.00 mm) |
| First Shield Material | Bonded Aluminum/Polyester/Aluminum tape (3.20 mm) |
| Outer Conductor Material | Tinned Copper Braid (3.55 mm) |
| Jacket Material | Black PVC or Polyethylene (5.00 mm) |
| Capacitance (Pf/M) | 82 |
| Impedance (ohm) | 50 |
| Velocity (%) | 81 |
| Inner Conductor DC Res. (Ω/KM) | 19.2/65.2 |
| Outer Conductor DC Res. (Ω/KM) | 16.3 |
| Shielded attenuation（dB） | >80 |
| Storage Temperature | -25 to +70 |
| Installation temperature (℃) | -25 to +70 |
| Cable Working temperature (℃) | - 25 to +70 |
| Minimum bend radius (mm) | 27 |
| Attenuation (20℃) | |
| 150 MHz | 13.00 dB/100m |
| 280 MHz | 17.50 dB/100m |
| 350 MHz | 19.50 dB/100m |
| 400 MHz | 21.00 dB/100m |
| 900 MHz | 31.60 dB/100m |
| 1200 MHz | 37.00 dB/100m |
| 1500 MHz | 41.50 dB/100m |
| 1800 MHz | 45.60 dB/100m |
| 2200 MHz | 50.60 dB/100m |
| 2500 MHz | 54.10 dB/100m |
| VSWR | 5-3000MHz ≤1.20 |
