Coaxial 5D-FB Cable, 10 m
5D-FB is a high power coaxial cable of 10 m (30 ft) length, used to transmit radio frequency (RF) signal. The cable is full band and it supports a frequency range 0-3 GHz. You can use this cable for all HiBoost repeater models.
- 2G/3G/4G networks
- 10 m/30 ft length
- Low loss
- Low VSWR
- Low transmission delay
- Minimum attenuation
Description
5D-FB is a high power coaxial cable of 10 m (30 ft) length, used to transmit radio frequency (RF) signal. The cable is full band and it supports a frequency range 0-3 GHz. You can use this cable for all HiBoost repeater models.NOTE: If you use a cable, which is longer than the one from your kit, the signal booster system will lose power and provide worse mobile signal enhancement.
| Inner Conductor Material | Solid Copper or Copper Clad Steel (1.80 mm) |
|---|---|
| Dielectric Material | Physical Foam Polyethylene (5.00 mm) |
| First Shield Material | Bonded Aluminum/Polyester/Aluminum tape (5.20 mm) |
| Outer Conductor Material | Tinned Copper Braid (5.7 mm) |
| Jacket Material | Black PVC or Polyethylene (7.50 mm) |
| Capacitance (Pf/M) | 82 |
| Impedance (ohm) | 50 |
| Velocity (%) | 82 |
| Inner Conductor DC Res. (Ω/KM) | 6.8/10.5 |
| Outer Conductor DC Res. (Ω/KM) | 14.1 |
| Shielded attenuation（dB） | >80 |
| Storage Temperature | -25 to +70 |
| Installation temperature (℃) | -25 to +70 |
| Cable Working temperature (℃) | - 25 to +70 |
| Minimum bend radius (mm) | 27 |
| Attenuation (20℃) | |
| 150 MHz | 17.80 dB/100m |
| 280 MHz | 10.80 dB/100m |
| 350 MHz | 12.10 dB/100m |
| 400 MHz | 13.00 dB/100m |
| 900 MHz | 20.20 dB/100m |
| 1200 MHz | 23.70 dB/100m |
| 1500 MHz | 26.80 dB/100m |
| 1800 MHz | 29.70 dB/100m |
| 2200 MHz | 33.30 dB/100m |
| 2500 MHz | 35.80 dB/100m |
| VSWR | 5-3000MHz ≤1.20 |
