Hi13-LTE800 :: 1-band Mobile Signal Repeater, 4G/LTE, 500 m²
- Network: 4G LTE 800 MHz
- Coverage: up to 500 m²
- Ready-to-use kit with antennas and cables
- User-friendly LCD display
- Plug-and-play system
- Smart auto setup
- Low power consumption
Make 4G mobile data up- an download a breeze! Use HiBoost Hi13-LTE800 to bring speedy 4G data transer into your home or office for good!The system performs at 4G LTE 800 MHz standard, used by all major mobile operators in Europe. With a coverage area up to 300-500 sq m, the device is perfect for any indoor area, like an apartment, small house, office, garage, basement, café, shop, etc.HiBoost Hi13-LTE800 comes small, elegant and with user-friendly LCD display. The booster is empowered by smart software able to auto set up the best parameters for your area in seconds after you turn it on.Choose it now and get fastest 4G data speeds ever!
*Mind that you should have at least 2-3 signal bars outside your house/office to make your booster provide overall strong signal enhancement. The device’s coverage also depends on building design features.
Assistance in Installation
Automatic Gain Control (AGC)
Intelligent System Setup
After the booster is on, AGC automatically measures input signal strength and adjusts best system parameters suitable for mobile signal reception conditions in your particular area.
Powerful Network Protection
AGC facilitates power control between the base station and a repeater to keep gain at the optimal level. This way HiBoost doesn’t overlap mobile network and keeps noise minimized up to zero.
Manual Gain Control (MGC)
The function lets you thoroughly adjust mobile signal amplification power on your own manually. Recommended for advanced users.
|HiBoost Hi13-LTE800 model comes in a full kit with all the necessary installation components:
If you need to extend a coverage area up to 500 sq.m., you can replace a whip antenna to a more powerful indoor panel or omnidirectional antenna.There’re 2 kinds of optional kits available:1) Panel Kit : indoor panel antenna, 50ft (15.2m) Hiboost200 cable2) Omni Kit: indoor omni ceiling antenna, 50ft (15.2m) Hiboost200 cableOmni Kit is ideal if it’s necessary to provide all round coverage, while Panel Kit is suitable if you need to focus the signal into a particular direction. Choose the one that best meets your needs!
|HiBoost product is officially certified for compliance with the international and European safety, quality and health regulations in the accredited test laboratories. Here’re the certificates we have:RoHS – RoHS directive proves the limitation upon the usage of hazardous materials in HiBoost product and in its components.ISO 9001-2015 – HiBoost meets ISO 9001-2015 quality management systems standard that sets out the principles basing on strong customer focus, top management involvement and efficiency, consistent product quality improvement.
How It Works
|1. The base station delivers a strong mobile signal, but can’t deliver it to your area
2. The outdoor antenna picks up a weak mobile signal from the base station
3. The signal goes from the outdoor antenna to the booster trough the cable
4. The booster amplifies the signal and transmits it to the indoor antenna
5. The indoor antenna spreads the boosted signal all around your area
6. Your mobile phone receives a strong signal and starts communicating with it
|Coverage Area||500 m²|
|Network Type||4G / LTE|
|Frequency||800 MHz (4G/LTE)|
|Frequency Range||832~862MHz (Uplink) 791~821MHz (Downlink)|
|Number Of Bands||Single Band|
|Max. Gain||60dB (Uplink) - 65dB (Downlink)|
|MGC (Step Attenuation)||≥ 31dB / 1 dB step, dip switch control|
|Intelligent AGC (ALC / ISO)||≥42 dB / ≥42 dB|
|Gain Flatness||Typical ≤5 dB (P-P)|
|Noise Figure @ Max. System Gain||Typical ≤5 dB|
|Group Delay||≤ 1 μs|
|Frequency Stability||≤0.01 ppm|
|Power Supply||Input AC90~264V.50/60Hz,Output DC 5V/3A|
|Input & Output Impedance||50 ohm|
|LCD Display||Frequency, Gain, Output Power, ALC, ISO, etc.|
|Indication LEDs||ISO LED, Alarm LED, Alarm LED|
|I /O Port Type||N-Female|
|Dimensions||120*155*34mm / 4.7*6.1*1.3 inch|
|Booster Weight||0.75 Kg|
|Booster Weight with KIT||3.15 kg|
|Relative Humidity||5% - 95%|
|Barometric Pressure||55 kPa -106 kPa|